Strawberryland Forum

Full Version: nabi Barbie tablet stock ROM (NBTY07SMKG-US-BB)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2
Took some time for my friend and I to pull this off, as we had to source a stock Barbie Nabi tablet off eBay for the sole purpose of ripping the firmware.

[Image: acofVeu.jpg]

The ROM's unsigned and may only be flashed with SP Flash Tool 5.1532.00. And it goes without saying to BACK UP YOUR STOCK ROM (basically everything, especially NVRAM, seccfg and secro; from my experience if you lose these, you're SOL) before installing this image!

To flash this ROM, run SP Flash Tool, open the scatter file (MT8127_Android_scatter.txt), uncheck all but BOOT, RECOVERY and ANDROID (or just ANDROID if the other system partitions are still intact), click Download, press and hold the Volume + button whilst plugging in the device, and wait until the tool starts flashing. Grab a cup of tea or coffee, and wait until the process is finished. If done correctly your device should be good as new. Wink

Download:
Code:
https://www.4shared.com/s/fvn6nAvZ_gm
https://androidfilehost.com/?fid=11410963190603905324

If you run into any problems with this or when it comes to repairing their device in general, feel free to ask me. Wink
(10-01-2018, 02:28 PM)huckleberrypie Wrote: [ -> ]Took some time for my friend and I to pull this off, as we had to source a stock Barbie Nabi tablet off eBay for the sole purpose of ripping the firmware.

[Image: acofVeu.jpg]

The ROM's unsigned and may only be flashed with SP Flash Tool 5.1532.00. And it goes without saying to BACK UP YOUR STOCK ROM (basically everything, especially NVRAM, seccfg and secro; from my experience if you lose these, you're SOL) before installing this image!

To flash this ROM, run SP Flash Tool, open the scatter file (MT8127_Android_scatter.txt), uncheck all but BOOT, RECOVERY and ANDROID (or just ANDROID if the other system partitions are still intact), click Download, press and hold the Volume + button whilst plugging in the device, and wait until the tool starts flashing. Grab a cup of tea or coffee, and wait until the process is finished. If done correctly your device should be good as new. Wink

Download:
Code:
https://www.4shared.com/s/fvn6nAvZ_gm
https://androidfilehost.com/?fid=11410963190603905324

If you run into any problems with this or when it comes to repairing their device in general, feel free to ask me. Wink
i flash NBTY07SMKG with this file after flash tab is dead plz help me 
plz upload factory firmware
(03-23-2021, 07:19 PM)hassan06 Wrote: [ -> ]
(10-01-2018, 02:28 PM)huckleberrypie Wrote: [ -> ]Took some time for my friend and I to pull this off, as we had to source a stock Barbie Nabi tablet off eBay for the sole purpose of ripping the firmware.

[Image: acofVeu.jpg]

The ROM's unsigned and may only be flashed with SP Flash Tool 5.1532.00. And it goes without saying to BACK UP YOUR STOCK ROM (basically everything, especially NVRAM, seccfg and secro; from my experience if you lose these, you're SOL) before installing this image!

To flash this ROM, run SP Flash Tool, open the scatter file (MT8127_Android_scatter.txt), uncheck all but BOOT, RECOVERY and ANDROID (or just ANDROID if the other system partitions are still intact), click Download, press and hold the Volume + button whilst plugging in the device, and wait until the tool starts flashing. Grab a cup of tea or coffee, and wait until the process is finished. If done correctly your device should be good as new. Wink

Download:
Code:
https://www.4shared.com/s/fvn6nAvZ_gm
https://androidfilehost.com/?fid=11410963190603905324

If you run into any problems with this or when it comes to repairing their device in general, feel free to ask me. Wink
i flash NBTY07SMKG with this file after flash tab is dead plz help me 
plz upload factory firmware
Did you perform a backup first before flashing?
(03-25-2021, 01:09 PM)huckleberrypie Wrote: [ -> ]
(03-23-2021, 07:19 PM)hassan06 Wrote: [ -> ]
(10-01-2018, 02:28 PM)huckleberrypie Wrote: [ -> ]Took some time for my friend and I to pull this off, as we had to source a stock Barbie Nabi tablet off eBay for the sole purpose of ripping the firmware.

[Image: acofVeu.jpg]

The ROM's unsigned and may only be flashed with SP Flash Tool 5.1532.00. And it goes without saying to BACK UP YOUR STOCK ROM (basically everything, especially NVRAM, seccfg and secro; from my experience if you lose these, you're SOL) before installing this image!

To flash this ROM, run SP Flash Tool, open the scatter file (MT8127_Android_scatter.txt), uncheck all but BOOT, RECOVERY and ANDROID (or just ANDROID if the other system partitions are still intact), click Download, press and hold the Volume + button whilst plugging in the device, and wait until the tool starts flashing. Grab a cup of tea or coffee, and wait until the process is finished. If done correctly your device should be good as new. Wink

Download:
Code:
https://www.4shared.com/s/fvn6nAvZ_gm
https://androidfilehost.com/?fid=11410963190603905324

If you run into any problems with this or when it comes to repairing their device in general, feel free to ask me. Wink
i flash NBTY07SMKG with this file after flash tab is dead plz help me 
plz upload factory firmware
Did you perform a backup first before flashing?

no i dont have backup plz help

(03-25-2021, 03:15 PM)hassan06 Wrote: [ -> ]
(03-25-2021, 01:09 PM)huckleberrypie Wrote: [ -> ]
(03-23-2021, 07:19 PM)hassan06 Wrote: [ -> ]
(10-01-2018, 02:28 PM)huckleberrypie Wrote: [ -> ]Took some time for my friend and I to pull this off, as we had to source a stock Barbie Nabi tablet off eBay for the sole purpose of ripping the firmware.

[Image: acofVeu.jpg]

The ROM's unsigned and may only be flashed with SP Flash Tool 5.1532.00. And it goes without saying to BACK UP YOUR STOCK ROM (basically everything, especially NVRAM, seccfg and secro; from my experience if you lose these, you're SOL) before installing this image!

To flash this ROM, run SP Flash Tool, open the scatter file (MT8127_Android_scatter.txt), uncheck all but BOOT, RECOVERY and ANDROID (or just ANDROID if the other system partitions are still intact), click Download, press and hold the Volume + button whilst plugging in the device, and wait until the tool starts flashing. Grab a cup of tea or coffee, and wait until the process is finished. If done correctly your device should be good as new. Wink

Download:
Code:
https://www.4shared.com/s/fvn6nAvZ_gm
https://androidfilehost.com/?fid=11410963190603905324

If you run into any problems with this or when it comes to repairing their device in general, feel free to ask me. Wink
i flash NBTY07SMKG with this file after flash tab is dead plz help me 
plz upload factory firmware
Did you perform a backup first before flashing?

no i dont have backup plz help

plz upload factory firmware or any backup this tab firmware
I've included every single partition in the firmware file, and I've already made it clear to BACK UP YOUR STOCK ROM before you even try to flash your device.
(03-25-2021, 06:20 PM)huckleberrypie Wrote: [ -> ]I've included every single partition in the firmware file, and I've already made it clear to BACK UP YOUR STOCK ROM before you even try to flash your device.

ITS MEAN U DONT HAVE ANY BACK UP OR FACTORY FIRMWARE
THANKS FOR REPLY ME...
(03-25-2021, 08:24 PM)hassan06 Wrote: [ -> ]
(03-25-2021, 06:20 PM)huckleberrypie Wrote: [ -> ]I've included every single partition in the firmware file, and I've already made it clear to BACK UP YOUR STOCK ROM before you even try to flash your device.

ITS MEAN U DONT HAVE ANY BACK UP OR FACTORY FIRMWARE
THANKS FOR REPLY ME...

PLZ IF U HAVE ANY BACKUP OR FIRMWARE PLZ UPLOAD
(03-25-2021, 10:25 PM)hassan06 Wrote: [ -> ]
(03-25-2021, 08:24 PM)hassan06 Wrote: [ -> ]
(03-25-2021, 06:20 PM)huckleberrypie Wrote: [ -> ]I've included every single partition in the firmware file, and I've already made it clear to BACK UP YOUR STOCK ROM before you even try to flash your device.

ITS MEAN U DONT HAVE ANY BACK UP OR FACTORY FIRMWARE
THANKS FOR REPLY ME...

PLZ IF U HAVE ANY BACKUP OR FIRMWARE PLZ UPLOAD
It’s already in the link on the first post   Dodgy
If this doesn't tell you that the ROM is a complete backup, I really don't know what will:
[Image: ebaepWy.png]
(03-26-2021, 10:48 AM)huckleberrypie Wrote: [ -> ]If this doesn't tell you that the ROM is a complete backup, I really don't know what will:
[Image: ebaepWy.png]
if u have any backup this tab plz uploas
Pages: 1 2